-Callboost 4X4 mimo 5g directional panel antenna, it usually used as the service antenna for the mimo cell phone mobile signal booster repeater amplifier,frequency range 698~3800mhz,support 2g 3g 4g 5g mobile network.
-Mimo antenna has four 4*4.3-10 Female port (the connection type could be customized), two in two out connection ports. The mobile cell phone 4g 5g network speed increase 200%.
-Not like other supplier normal 5g antenna,Amplitec 4x4 MIMO 5g antenna is high gain design,the best 2g 3g 4g 5g signal receiver,ensure the signal can be enhanced perfectly.
Electrical specifications | |||
Frequency range (MHz) | 698~960 | 1710~2700 | 3300~3800 |
Polarization | ±45° | ||
Gain (dBi) | 6 ± 1 | 8 ± 1 | 8 ± 1 |
Horizontal beam width (°) | 80 ± 15 | 60 ± 15 | 65 ± 15 |
Vertical beam width (°) | 75 | 55 | 40 |
Front-to-back ratio (dB) | ≥ 20 | ≥ 25 | ≥ 20 |
Cross-polar discrimination (dB) | / | ||
Isolation (dB) | ≥ 18 | ≥ 20 | ≥ 25 |
Impedance (Ω) | 50 | ||
VSWR | ≤ 1.8 | ||
Intermodulation IM3 (2×43dBm carrier) | ≤ -150 dBc | ||
Maximum power (W) | 50 | ||
Lighting protection | DC Ground | ||
Mechanical specifications | |||
Connector | 4*4.3-10 Female or 4* N-Female | ||
Connector position | Bottom | ||
Exposed cable size (cm) | 30(or customer requirement) | ||
Height/width/depth (mm) | 410*305*84 | ||
Packing size (mm) | 480*370*180 | ||
Weight (kg) | 2 | ||
Radome material | ABS | ||
Radome color | White(RAL9003) | ||
Operating temperature (℃) | -40~60 | ||
Application | Indoor | ||
Mounting | Wall Mounting |
1. Position and fix the mounting plate onto the wall with the countersunk self-tapping screws M4.2×25 and plastic accessories.
2. Finish the installation by matching the clamp piece on the antenna base plate to the mounting plate hanger.
Send us inquiry to get code for checking the specifications.