● High Out-of-Band Suppression ensures robust resistance against interference.
● Strong Interference Resistance thanks to its advanced signal processing capabilities.
● Minimal Insertion Loss and Low Noise enhanced the reception quality.
● High Reception Sensitivity with -139dBm@SF12 to capture signals from far distances or in low signal areas.
● IP65 Waterproof Rating. Ideal for outdoor installation.
● High Power Output for Long-Distance Coverage
● ALC / AGC function is to automatically control the signal strength by TX gain and power, stabilize the equipment.
Send us an inquiry to obtain the code for checking specifications.
As the domain of wireless communication expands, the complexity of radio waves within the atmospheric space is on the rise. In the Helium IoT ecosystem, the proliferation of adjacent-channel radio wave signals poses a significant interference to Hotspots, leading to a notable degradation in reception sensitivity and a considerable shrinkage in reception range. This predicament has prompted many participants within the Helium Network to consider installed a LoRa Signal Booster as a means to augment the reception coverage.
However, the conventional LoRa Signal Booster typically employs a Surface Acoustic Wave (SAW) filter with subpar out-of-band suppression capabilities for signal filtering. This results in an inadequate suppression of interfering signals, and the signal loss within the operational frequency band exceeds 3dB. Consequently, this inadvertently elevates the system noise by more than 3.5dB, amplifying both the LoRa signal and the interfering signals in tandem. This scenario paradoxically contributes to a diminution in the reception sensitivity of Hotspots, explaining why many Miners, upon the addition of LoRa Signal Boosters, do not observe the anticipated enhancement in their witness count.
In essence, the quest for improved reception range through LoRa Signal Boosters is often met with the unintended consequence of increased interference, highlighting the critical need for advanced filtering technologies that can effectively mitigate out-of-band signals without compromising the integrity and strength of the LoRa signal itself. So we designed a lora amplifier with 868MHz / 915MHz to enhance helium miners lora network.
RX 17dB , TX 0-17dB Auto-adjust
Only our Callboost booster can adjust TX Gain and Power, because we have build-in AGC and ALC function.
It's automatically adjust according to the signal strength of the input port.
ALC / AGC function is to automatically control the signal strength, stabilize the equipment.
Whether you want to output high gain or low gain, it can meet your needs.
868MHz / 915MHz Lora Amplifier Gain output Steadily
CALLBOOST FLARM BOOSTER amplifies the 868 MHz / 915 MHz antenna signal by +17dB, and also increases the transmit signal of the FLARM device by 17dB, increasing the monitoring range of the FLARM device by about 5 times.
When the TX transmit power is greater than 23dBm, the AGC will be activated to attenuate the TX gain to stabilize the TX transmit power.
Please send emails to us to know more data about lora signal booster,as well as data of 915mhz.
RX 17dB , TX 0-17dB Auto-adjust
Automatic gain control automatically adjust the output power
The FLARM BOOSTER amplifies the 868MHz antenna signal by +17dB, and also increases the transmit signal of the FLARM device by 17dB, increasing the monitoring range of the FLARM device by about 5 times.When the TX transmit power is greater than 23dBm, the AGC will be activated to attenuate the TX gain to stabilize the TX transmit power.
TWO FREQUENCY BANDS
EU 868MHz and US 915MHz
Specific working frequency usually for EU is 860-870MHz with TX & RX. However,900-930MHz will be available for Americas Region.
The working power of the Booster is DC+5V~+24V, which can be powered from the DC power socket by the power adapter, or can be powered from the FLARM RF port by the Basi Tee.
BUILD IN PRECISION FILTER
Saw filter inside the lora signal booster
Callboost FLARM BOOSTER built in precision filter avoids interferences with out-of-band signals,filter unwanted spurious signals.Lora hotspot HNT lora flarm booster working independently with out cavity filter.
If you want to plus an external cavity filter, please let us know and we will assist in removing the built-in filter.
CAVITY FIILTER GIVE MORE EFFECT
Click picture next to know more
The CFL868-S20 / CFL868-S20 Cavity Filter is a band-pass filter for Helium IoT, the main function is to suppress interference signals outside the frequency bandwidth of the Lora wireless network. Compared with RF SAW Filter, Cavity Filter has stronger out-of-band suppre
Callboost lora signal boosters for HNT hotspot miners is of three kind of connector to choose
PRODUCT PARAMETERS
Model
CB17W-LR868
CB17W-LR915
Specifications
RX
TX
RX
TX
Frequency Range
863 ~ 870 MHz
863 ~ 870 MHz
902 ~ 928 MHz
902 ~ 928 MHz
Gain with AGC
17dB ±1dB
0~17dB Auto-adjust
17dB ±1dB
0~17dB Auto-adjust
ALC Control Range
-
≥17dB
-
≥17dB
Output Power
≥0dBm
23dBm
≥0dBm
23dBm
Input Trigger Power
-
≥-2±2dB
-
≥-2±2dB
Max. Input Power Without Damage
0dBm
27dBm
0dBm
27dBm
Intermodulation Products
≤45dBm
≤-36dBc
≤45dBm
≤-36dBc
Send us emails inquire more data and the specification
